Media Tech Institute

This was a fun project. The customer wanted a "floating look" for there logo mounted to there building. After some revised ideas we came up with a 1" aluminum frame with mounted legs into concrete. The aluminum frame was coated with a Grip Guard primer that allowed us to paint the frame any color we needed. We painted to match the stucco on the wall. So from a distance you would only see the logo not the frame. This was 1/2" Painted PMS color Acrylic, Pin mounted in 3 sections into the aluminum structure. The Aluminum Structure was then bolted to the concrete overhang.

The other image is of the same logo on the side of the building. These were previously made for the client and they needed them installed. They were cut from steel and then painted. So we roughed up the backs and put it up with some VHB and Silicone.